News

  • 0
  • 0

Global TaC powder market trend 2022-2026 Applications of Tantalum Carbide TaC Powder by Newsteampindar

The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.

Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the TaC powder may also be affected to a certain extent.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide is a kind of transition metal carbide. Black or dark brown metallic powder, cubic crystal system, hard. Melting point 3880, boiling point 5500, relative density 13.9, hardness 9 ~ 10. Insoluble in water, slightly soluble in sulfuric acid and hydrofluoric acid, soluble in a mixture of hydrofluoric acid and nitric acid.
Its chemical properties are extremely stable. It has excellent physical and chemical properties, such as high hardness, high melting point, good electrical conductivity, and thermal shock resistance, good chemical corrosion resistance, high oxidation resistance, catalytic performance, etc.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3

 
Applications of Tantalum Carbide TaC Powder
Tantalum carbide is mainly used for cemented carbide, capacitors, electronic devices, high-temperature components, chemical equipment, and armor piercing shells.

1. Cemented carbide 
Tantalum carbide plays an important role in cemented carbide. It improves the properties of the alloy by improving the fiber structure and phase transformation dynamics, making the alloy have higher strength, phase stability, and processing deformation ability.  Tantalum carbide has a very high melting point (4000) and good thermodynamic stability. Tantalum is particularly effective in promoting nucleation and preventing carbon precipitation from nucleated brittle films formed during late solidification. Its main function is to prevent cemented carbide grain from growing up. In addition, it forms a third dispersion phase with TiC besides WC and Co, which significantly increases the thermal shock resistance, crescent hole wear resistance, and oxidation resistance of cemented carbide, and improves its redness and hardness. 
TaC is added into the alloy in different ways, which will greatly affect the properties of the alloy. On the other surface, the TiC-TaC-WC core phase formed by adding TaC to the alloy as TiC-TaC-WC solid solution has a larger sub-crystal size and smaller microscopic strain than the TiC-TaC-WC core phase, and the former one has better physical and mechanical properties and longer cutting life. 
 
2. Electronics industry 
In recent years, transition metal carbides have attracted much attention due to their chemical stability, high hardness, strong oxidation and corrosion resistance, low resistivity, and many other advantages. Carbide nanomaterials show great potential in metal coatings, tools, machine parts, and composites. Among all the carbide nanomaterials, silver carbide is one of the most popular materials, and also one of the materials with the greatest potential. Tantalum carbide not only inherits many advantages of carbide nanomaterials, but also has its own unique side, such as high hardness (Mohs hardness is 9-10 at room temperature, high melting point (about 3880), high Young's modulus (283-550 GPa), strong conductivity (conductivity is 32.7-117.4μ ω ·cm at 25), high-temperature superconductivity (10.5K), strong resistance to chemical decay and thermal shock, and high catalytic activity for ammonia decomposition and hydrogen separation. 
At present, tantalum carbide powder and whisk tantalum carbide have been prepared by means of carbothermic reduction, thermal plasma, solvothermal, sol-gel, microwave heating, alkali reduction, self-propagating high-temperature synthesis, and high-frequency induction heating sintering.
 
3. Superalloys
Among carbides, the best melting resistance is tantalum carbide (TaC) (melting point 3890) and hafnium carbide (HfC) (melting point 3880), followed by zirconium carbide (ZrC) (melting point 3500). These materials have excellent mechanical properties at high temperatures, far exceeding the best polycrystalline inks. Tantalum carbide, in particular, is the only material that maintains certain mechanical properties over the temperature range of 2900 to 3200. However, the disadvantage of tantalum carbide is that it is very sensitive to thermal shock, and the low thermal conductivity and high thermal expansion coefficient of carbide become the biggest obstacle to the application of aerospace materials. The addition of tantalum carbide to carbon/carbon composites will have higher thermal conductivity and lower thermal expansion conditions, and exert the oxidation resistance and ablative resistance of refractory metals. 
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

 

Due to the limited total amount of traditional energy, people have a huge demand for cleaner and greener new energy alternatives. Now, the emergence of graphene is unlocking the possibility of its application in the energy field, which can create a greener, more efficient, and sustainable future. Here Francesco Bonaccorso, Deputy Director of Innovation at the Graphene Flagship Program, explains how his researchers have developed a series of initiatives to bring graphene from the lab to the commercial market. Graphene has become a research hotspot for new materials in the 21st century. Graphene has been adopted by many industries, the most notable of which are healthcare and key material applications.

The development of graphene has brought huge fluctuations in the demand for TaC powder, and the demand for TaC powder will continue to grow in the future. You can contact us for the latest news on TaC powder.

Inquery us

Our Latest News

Global boron carbide powder market trend 2023-2026 What is Boron Carbide Used For? by Newsteampindar

Boron carbide (B4C) is an extremely hard boron-carbon ceramic and covalent material used in tank armor, bulletproof vests, engine damage powder, and many industrial applications.…

Global nano silica market trend 2022-2026 What is Nano Silica Used For? by Newsteampindar

Gazprom recently said it had completely suspended gas supplies to Bulgarian Gas company and Polish Oil and Gas Company (PGNiG) because it was not being paid in rubles. Russia said it would resume gas supplies after it agreed to pay for them in ruble…

Global natural graphite market trend 2024-2030 What is Natural Graphite Used For? by Newsteampindar

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of t…