TRUNNANO | Ceramic powder, graphite powder,boron powder, and 3D printing metal Nanomaterial supplier & Manufacturer.
Recently, covid 19 outbreak spreads in Shanghai, China. There are more than 25,000 new asymptomatic domestic infections every day. China is implementing a dynamic zero-out policy. A leading respiratory expert said the key to COVID-19 prevention and control is to minimize transmission and fatality rate. Omicron has a low case fatality rate but is highly transmissible and can still claim many lives in large outbreaks. "Total openness is not applicable in China. For China, we should keep to the dynamic zero-out and gradually open up."
However, "dynamic zero clearance" is not the pursuit of complete "zero infection". As the Novel Coronavirus has its own uniqueness and strong concealment, there may be no way to prevent the detection of cases at present, but rapid detection and prompt treatment must be carried out, as soon as one case is found, one case will be dealt with.
The situation in Shanghai is serious. As the financial center of China, Shanghai is a very important city, and the outbreak of the epidemic in Shanghai will put a great impact on China's economy. The current task is to contain the spread of the epidemic as soon as possible, to achieve social zero so that Shanghai's life and economy quickly return to normal.
As China plays an important role in the global supply chain, the outbreak will have a significant impact on the supply and prices of many concrete foaming agent.
Self-leveling regulating water-retaining agent
Dry and large flow concrete is used to solve the problems of unreasonable gradation of sand and stone, excessive stone powder, machine-made sand, bottom glue, low-grade large flow concrete, and poor waterline and workability after pumping and coagulation, which is different from traditional cellulose and dextrin. This product and the superplasticizer system have good mutual solubility, and there will be no delamination and deterioration at different temperatures. It is recommended to add 5~20kg per ton of finished polycarboxylic acid superplasticizer.
Machine-made sand regulator (liquid, powder)
Uses: it can be used for machine-made sand concrete to open, but it has poor workability, poor slump protection, less paste, exposed stone, bottom peeling and other conditions to improve its overall performance. It is recommended that 10% polycarboxylic acid superplasticizer be added with 20~40kg per ton.
Mud inhibitor (liquid, powder)
Used for washing sand, mountain sand, stone powder, artificial broken sand, large mud content of rubber, to ensure that it can be opened and protected, repel cement particles and disperse the paste. Equal or excessive replacement of ethers, so that polycarboxylic acid superplasticizer and slump-retaining agent play a routine role in practical work, so there is no need to greatly increase the amount of superplasticizer to achieve dispersion. It is recommended that 10~30kg should be added to polycarboxylic acid superplasticizer with 10% solid content per ton.
Low temperature early strength antifreeze
Anti-freezing early strength, effectively improve 1-day, 3-day, 7-day early strength, no effect on the later strength growth, good frost resistance. It is recommended that 10% polycarboxylic acid superplasticizer plus 5-20kg per ton.
Concrete viscosity reducer
It is used for high grade concrete, low grade concrete with much stone powder and mortar and grouting materials. It is suggested that polycarboxylic acid superplasticizer with 10% solid content per ton should be added to this product 20~40kg.
When used in washing sand, it can effectively degrade and neutralize the effect of polyqing flocculant on the dispersibility, slump retention and strength of concrete. It is recommended that polycarboxylic acid superplasticizer with 10% solid content per ton be added to this product 20~40kg.
Concrete anti-segregation agent
The concrete used for large slump segregation has a good control effect and a wide range of dosage. it is suitable for drivers to adjust at the construction site without returning the car, and will not affect the strength, setting time and chromatic aberration of segregated concrete. This product is powder. It is recommended to add 0.5-1kg to each side of concrete and mix fully in the mixer for more than 3 minutes.
When used in the environment with high temperature (above 35 ℃), it has a wide adaptability to materials and will not appear pseudo-condensation phenomenon. It can delay the final setting of concrete for more than 18 hours and does not affect the later strength. It is recommended that 10% polycarboxylic acid cost addition 10~60kg/.
Polycarboxylic acid high efficiency air entraining agent
The foaming and stabilizing properties are good, and the foam and foam size can be adjusted for a wide range of materials. Reduce the adsorption of superplasticizer in inferior cementing materials, effectively improve the grouting, workability and impermeability of concrete, and have little effect on the strength of thermosolidified soil. The finished product containing 10% solid content of polycarboxylic acid per ton is added to this air entraining agent 0.5~2.0kg (common dosage 0.8~1.5kg); 20% solid content is doubled accordingly. It is recommended that 30% of naphthalene or aliphatic or aminosulfonic acid superplasticizer per ton, plus 1.5 ~ 3.0kg.
Naphthalene slump protection agent
The cement particles are released from charge in the later stage of hydration to achieve the purpose of post-dispersion, so that the concrete can get plasticity, thus delaying the slump loss of concrete and saving the amount of air entrained and dextrin. It is suggested that naphthalene superplasticizer with 30% solid content should be added to 25~40kg per ton.
Polycarboxylic acid (naphthalene series, etc.) superplasticizer is antiseptic and sterilized with polycarboxylic acid, sodium gluconate, sugar and other components. Industrial washing products, emulsified metal processing oil and other anti-corrosion. It is recommended to add 0.8~2kg per ton of finished products.
Concrete foaming agent
Foaming and foam stabilization, used for lightweight thermal insulation material of foamed concrete. Backfill concrete ten sound insulation materials, 3D printing materials, etc. According to the bulk density or strength requirements of different materials, the addition amount varies from 1% to 10% of the rubber material.
Coagulation and water reducer industries, papermaking, oil refining, coal water slurry additives, sewage treatment and other industries to eliminate large foam and stabilize micro-foam. It is recommended to add 100-200g per ton of finished superplasticizer.
Modified rosin air entraining agent
The disadvantages of high viscosity and poor water solubility of traditional macromolecular rosin air entraining agent can be changed to form fine and dense bubbles and good stability of microfoams. Improve the workability and impermeability of concrete. It is recommended to add this product 2~4kg for every ton of finished water reducer.
Concrete Additives Supplier
TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.
If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (email@example.com)
We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.
The coronavirus (COVID-19) pandemic not only had a significant impact on public health, it also severely affected one of the linchpins of the global economy – the tourism industry. As many countries introduced curfews and travel restrictions to contain the spread of the virus, travel across the world significantly declined from early 2020 onwards. The financial repercussions of the coronavirus have already begun to manifest themselves within the tourism industry. In 2020, global revenue from the travel and tourism industry was estimated to drop from a forecasted 711.94 billion U.S. dollars to 568.6 billion U.S. dollars, representing a decrease of over 20 percent. The region predicted to see the highest decline in revenue was Europe, decreasing from 211.97 billion U.S. dollars in 2019 to roughly 124 billion U.S. dollars in 2020.
This article will introduce the use of various concrete additives, like the amount that should be added.…
Russian President says if the European Union imposes an oil embargo, Europe will buy energy at the most expensive price and economic activity in Europe will weaken. Rosneft needs to change its business model. Russia will help facilitate settlement an…
In this article, defoamer, anti-shrinkage agent, preservation agent, and inhibitor will be talked about.…